Why does dry extrusion ruin machine

Machines can overexpress themselves through dry extrusion. Once the ingredients have dried, they don’t move through the machine effectively. This causes the parts of the machine, such as screws and barrels, to work overtime. It’s no different from trying to run a race without enough water; it can make you beat. And the machine can get worn and hot when materials are dry, too. This can cause the machine parts to bend or break, which isn’t good for the machine or for what it’s making.

Machine can generate more friction

When there’s not as much moisture, the film extrusion machine can generate more friction among its pieces. Think of rubbing your dry palms together. It feels scratchy, right? The same process occurs within the machine when the materials are dry. The parts grind on one another too much, creating heat and friction. This can result in parts being worn out faster, sort of like rubbing your hands too much wears out your skin and makes them sore and red. Should this occur, the machine may not operate as effectively and end up costing more money in repairs.

Machine’s gears and other parts

Dry particles can also clog up the machine’s gears and other parts, stopping it from working. Ever tried to suck up a thick milkshake through a thin straw? It’s hard, isn’t it? Dry ingredients can clog the machine in the same manner. They may become lodged in the machine’s moving parts, preventing them from functioning as intended. This may cause the machine to jam or even fail. Just as you can’t sip a milkshake through a clogged straw, the machine requires materials with adequate moisture to move through the system.

Reliability of the machine

Dry materials may not distribute properly within the foam extrusion machine. This can cause parts of the material to end up with too much pressure, and others with not enough. It’s as if standing on one foot for too long can make your ankle sore. Inconsistent pressure in the machine can harm specific areas and lead to damage over time. This can reduce the reliability of the machine, and it may be more likely to fail in the future.

Solid Materials

Dry goods are also liable to become brittle, that is, to break easily. The solid materials are like a hard, dry, crumbly cookie. But when such brittle things pass through the mechanical press, they can become lodged or snap, resulting in jams or breaks. Hess and Roux never experienced a machine completely failing, but have found that, much like a cookie crumbling when you try to break it, dry materials can crumble inside the machine. It can lead to trouble and prevent the machine from performing effectively.

Summary

In summary, dry extrusion can kill one of our machines Jwell. It can overwork the tube extrusion machine, increase friction, lead to blockages, uneven pressure and make materials brittle. All of these issues can cause the machine to fail, or to not work as it is supposed to. This is why it’s so critical to ensure that the materials have enough moisture to keep the machine operating without a hitch. Your body needs to drink water to be healthy, and the machine needs to get those moist materials to stay in its best form. So there you have it, being so dry, not a good thing for everything but for machines like Jwell!